Creating A Raid 1 Set (Mirror) - Asus 1U Rackmount Barebone Server RS120-E3 (PA4) User Manual

6.3.2 6.3.2 6.3.2

Creating a RAID 1 set (Mirror)

Creating a RAID 1 set (Mirror) Creating a RAID 1 set (Mirror)
6.3.2 6.3.2 Creating a RAID 1 set (Mirror) Creating a RAID 1 set (Mirror)
To create a RAID 1 set:
1. From the utility main menu, select 1 . C r e a t e R A I D V o l u m e
press <Enter>. This screen appears.
Intel(R) Matrix Storage Manager Option ROM v5.0.0.1032 ICH7R wRAID5
Copyright(C) 2003-05 Intel Corporation. All Rights Reserved.
Enter a string between 1 and 16 characters in length that can be used
to uniquely identify the RAID volume. This name is case sensitive and
2. Enter a name for the RAID 1 set, then press <Enter>.
3. Highlight R A I D L e v e l
|R A I D 1 ( M i r r o r ) R A I D 1 ( M i r r o r ), then press <Enter>. R A I D 1 ( M i r r o r ) R A I D 1 ( M i r r o r )
R A I D 1 ( M i r r o r )
4. Follow steps 4 to 5 and 7 to 9 of the previous section to create the
RAID 1 set.
6 - 3 4 6 - 3 4 6 - 3 4
6 - 3 4 6 - 3 4
[
Name:
RAID Level:
Disks:
Strip Size:
Capacity:
[ DISK/VOLUME INFORMATION
cannot contain special characters.
[↑ ↑ ↑ ↑ ↑ ↓ ↓ ↓ ↓ ↓ ]-Select
[ESC]-Exit
R A I D L e v e l R A I D L e v e l
R A I D L e v e l R A I D L e v e l, press the up/down arrow key to select
1 . C r e a t e R A I D V o l u m e, then 1 . C r e a t e R A I D V o l u m e 1 . C r e a t e R A I D V o l u m e
1 . C r e a t e R A I D V o l u m e
CREATE ARRAY MENU
Volume1
RAID1(Mirror)
Select Disks
N/A
0.0 GB
Create Volume
C h a p t e r 6 : R A I D c o n f i g u r a t i o n C h a p t e r 6 : R A I D c o n f i g u r a t i o n C h a p t e r 6 : R A I D c o n f i g u r a t i o n
C h a p t e r 6 : R A I D c o n f i g u r a t i o n C h a p t e r 6 : R A I D c o n f i g u r a t i o n
]
]
[ENTER]-Select Menu