Table of Contents
Advertisement
6.4.5
6.4.5
6.4.5
Creating a RAID 0 (Stripe) set
Creating a RAID 0 (Stripe) set
Creating a RAID 0 (Stripe) set
6.4.5
6.4.5
Creating a RAID 0 (Stripe) set
Creating a RAID 0 (Stripe) set
You can create a striped array using the LSI Logic Configuration Utility.
To create a RAID 0 set:
1.
From the R A I D P r o p e r t i e s
to include in the RAID 0 set.
The A r r a y
A r r a y label on top of the screen changes to IS (Integrated
A r r a y
A r r a y
A r r a y
Striping).
2.
After selecting the drives, press <Esc>.
3.
When prompted, select <Save changes, then exit this menu>, then
press <Enter> to create the RAID 0 set.
6 - 4 4
6 - 4 4
6 - 4 4
6 - 4 4
6 - 4 4
R A I D P r o p e r t i e s
R A I D P r o p e r t i e s
R A I D P r o p e r t i e s screen, select the drives that you want
R A I D P r o p e r t i e s
C h a p t e r 6 : R A I D c o n f i g u r a t i o n
C h a p t e r 6 : R A I D c o n f i g u r a t i o n
C h a p t e r 6 : R A I D c o n f i g u r a t i o n
C h a p t e r 6 : R A I D c o n f i g u r a t i o n
C h a p t e r 6 : R A I D c o n f i g u r a t i o n
Advertisement
Table of Contents
