Asus 1U Rackmount Barebone Server RS120-E3 (PA4) User Manual page 61

8 . 8 . 8 . 8 . 8 . S S I S S I power connectors (24-pin ATXPWR1, S S I S S I S S I power connectors (24-pin ATXPWR1, power connectors (24-pin ATXPWR1, power connectors (24-pin ATXPWR1, 4 4 4 4 4- p i n power connectors (24-pin ATXPWR1,
These connectors are for SSI power supply plugs. The power supply
plugs are designed to fit these connectors in only one orientation. Find
the proper orientation and push down firmly until the connectors
completely fit.
• Use of an SSI 12 V Specification 2.0-compliant power supply unit (PSU)
that provides a minimum power of 400 W is recommended for a fully-
configured system.
• Do not forget to connect the 4-pin ATX +12 V power plug; otherwise,
the system will not boot up.
• Use of a PSU with a higher power output is recommended when
configuring a system with more power consuming devices. The system
may become unstable or may not boot up if the power is inadequate.
• You must install a PSU with a higher power rating if you intend to
install additional devices.
®
P5MT-R
P5MT-R ATX power connectors
A S U S R S 1 2 0 - E 3 / P A 4 A S U S R S 1 2 0 - E 3 / P A 4 A S U S R S 1 2 0 - E 3 / P A 4
A S U S R S 1 2 0 - E 3 / P A 4 A S U S R S 1 2 0 - E 3 / P A 4
- p i n - p i n - p i n - p i n A T X 1 2 V 1
ATXPWR1
+3 Volts
24-pin
+12 Volts
Power Connector
+12 Volts
+5V Standby
Power OK
Ground
+5 Volts
Ground
+5 Volts
Ground
+3 Volts
+3 Volts
ATX12V1
A T X 1 2 V 1 A T X 1 2 V 1 A T X 1 2 V 1) ) ) ) ) A T X 1 2 V 1
Ground
+5 Volts
+5 Volts
+5 Volts
-5 Volts
Ground
Ground
Ground
PSON#
Ground
-12 Volts
+3 Volts
1
GND +12V DC
GND +12V DC
4 - 1 3 4 - 1 3 4 - 1 3
4 - 1 3 4 - 1 3