Table of Contents
Advertisement
5.
Carefully insert the drive tray and
push it all the way to the depth of
the bay until just a small fraction
of the tray edge protrudes.
When installed, the SATA connector on the drive connects to the SATA
interface on the backplane.
6.
Push the tray lever until it clicks,
and secures the drive tray in place.
The drive tray is correctly placed
when its front edge aligns with the
bay edge.
7.
Repeat steps 1 to 6 if you wish to
install a second SATA drive.
8.
Connect the bundled SATA cables to the connectors on the SATA
backplane. Refer to section "2.7 SATA backplane cabling" for information
on the SATA backplane cable connections.
2 - 1 2
2 - 1 2
2 - 1 2
2 - 1 2
2 - 1 2
C h a p t e r 2 : H a r d w a r e s e t u p
C h a p t e r 2 : H a r d w a r e s e t u p
C h a p t e r 2 : H a r d w a r e s e t u p
C h a p t e r 2 : H a r d w a r e s e t u p
C h a p t e r 2 : H a r d w a r e s e t u p
Advertisement
Table of Contents
