Creating A Raid 0 Set (Stripe) - Asus Pedestal/5U Rackmount Server TS500-E5 User Manual

Asus ts500-e5 pedestal/5u rackmount server user guide
Hide thumbs Also See for Pedestal/5U Rackmount Server TS500-E5:
Table of Contents

Advertisement

6.3.1

Creating a RAID 0 set (Stripe)

To create a RAID 0 set:
From the utility main menu, select 1. Create RAID Volume, then press
1.
<Enter>. This screen appears.
to uniquely identify the RAID volume. This name is case sensitive and cannot
[ ↑↓ ]-Select
2.
Enter a name for the RAID 0 set, then press <Enter>.
Highlight RAID Level, press the up/down arrow key to select RAID 0 (Stripe),
3.
then press <Enter>.
Highlight the Disks item, then press <Enter> to select the hard disk drives
4.
you want to include in the RAID set. The SELECT DISKS screen appears.
5.
Use the up/down arrow key to highlight a drive, then press <Spacebar>
to select. A small triangle marks the selected drive. Press <Enter> after
completing your selection.
6-32
Intel(R) Matrix Storage Manager Option ROM v7.6.0.1011 ICH9R wRAID5
Copyright(C) 2003-05 Intel Corporation. All Rights Reserved.
Name:
RAID Level:
Disks:
Strip Size:
Capacity:
[
DISK/VOLUME INFORMATION
Enter a string between 1 and 16 characters in length that can be used
contain special characters.
[ESC]-Exit
Port
Drive
Model
0
XXXXXX
XXXXXX
1
XXXXXX
XXXXXX
2
XXXXXX
XXXXXX
3
XXXXXX
XXXXXX
Select 2 to 4 disks to use in creating the volume.
[ ↑↓ ]-Previous/Next
[SPACE]-Selects
[
CREATE ARRAY MENU
]
Volume0
RAID0(Stripe)
Select Disks
128KB
0.0
GB
Create Volume
[ENTER]-Select Menu
[
SELECT DISKS
]
Serial #
Size
XX.XGB
XX.XGB
XX.XGB
XX.XGB
[ENTER]-Selection Complete
]
Status
Non-RAID Disk
Non-RAID Disk
Non-RAID Disk
Non-RAID Disk
Chapter 6: RAID configuration

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ts500-e5 pa4Ts500-e5 rx8Ts500-e5

Table of Contents