Panasonic KX-TD208CE Operating Instructions Manual page 48

2.5 During a Conversation
Transferring a Call to an Extension after Paging
SLT
During a
conversation;
R
6
Press Dial 63.
RECALL.
PT
During a
conversation;
6
TRANSFER
Press Dial 63.
TRANSFER.
!
• If you want to return to the held call, press the RECALL button (for SLT/ISDN
!
telephone), TRANSFER, corresponding CO or INTERCOM button (for PT) before the
destination extension answers.
• Transferring a call by the DSS button;
Proprietary telephone users can also transfer an outside call to an extension simply by
pressing the DSS (Direct Station Selection) button, if assigned.
• If the destination extension does not answer the call within 12 rings (default), Transfer
Recall occurs. If the transferred call is an outside call, it is possible to select whether the
Transfer Recall will occur at the initiating extension or the manager through system
optional programming.
• If you do not answer the Transfer Recall within 15 minutes, the line will be disconnected.
• It is system-programmable whether to send a ringback tone or music on hold to the caller
while transferring.
• Initial Settings (Section 2.2)
Customising the Buttons on Your Telephone
• Timer Programming (Section 3.5)
[201] Transfer Recall Time
• Optional Programming (Section 3.12)
[902] System Additional Information
2-34
Operations
0
to page all
extension group no.
3
Dial 0 or
extension group number (1···8).
0
to page all
extension group no.
3
Dial 0 or
extension group number (1···8).
for group
paging
Confirmation
tone
for group
paging
Confirmation
tone
Announce. Wait for On-hook
an answer.
Announce. Wait for
an answer.
On-hook