Table of Contents
Advertisement
2.2
Initial Settings
I
TEM
Which line do you prefer to
seize when you go off-hook
to receive calls?
(Preferred Line
Assignment – Incoming)
Which way do you prefer to
dial the One-Touch Dialling
feature?
(Full One-Touch dialling
Assignment)
Which way do you prefer to
receive an intercom call?
(Intercom Alert
Assignment)
Do you prefer to distinguish
the Call Waiting Tone
received from an outside line
(CO) and intercom? (Call
Waiting Tone Type
Selection)
Do you prefer a tone when
pressing the dialling buttons?
(Key Click Tone
Assignment)
Which receiving equipment
will you use?
(Handset/Headset Selection
— DPT only)
!
• To confirm the stored function data;
!
The stored function data will be displayed by pressing the first digit of the Programming
Input while in programming mode. If the function is not required to be changed, press
the HOLD button to return to the initial programming display.
S
ELECTION
No line selected.
The ringing outside line (CO)
(Default)
A pre-assigned ISDN port
Go Off-hook and then press
the One-Touch Dialling button.
Just press the One-Touch
Dialling button. (Default)
Ringing (Default)
The party's voice is heard right
after the confirmation tone.
No. Use the same tone
(tone 1). (Default)
Yes. Use a different tone
(tone 2).
No. Turn off the tone.
Yes. (Default)
Handset (Default)
Headset
P
I
ROGRAMMING
NPUT
2
1
2
2
ISDN port no.
2
3
(1···2)
3
1
3
2
4
1
4
2
5
1
5
2
7
1
7
2
8
1
8
2
Operations
(Continued)
2-7
Advertisement
Table of Contents
