Panasonic KX-TD208CE Operating Instructions Manual page 100

Table of Contents

2.7

Display Operation (KX-T7235/KX-T7433/KX-T7436)

• To store numbers, you can use 0 through 9,

the INTERCOM button as follows:

Combination Table

Each character can be entered by using the dial key pad and some buttons, or the Jog Dial

for storing names.

Combination Table 1 shows the combination of keys and the number of times to press the

SELECT (AUTO ANSWER/MUTE) button, or the combination of keys and the SHIFT and

Soft buttons to enter characters. (The AUTO ANSWER/MUTE button becomes the

SELECT button when using the overlay.)

To enter a character, ﬁnd the key and number of times to press the SELECT button or the

corresponding SHIFT and Soft button combination on the table. Press the corresponding

key ﬁrst, then press the SELECT button the required number of times. Or you can use the

SHIFT button and the Soft button (S1 through S3) instead of the SELECT button.

Combination Table 2 shows the combination of keys and the number of pulses to move the

Jog Dial (click tones) to the right.

To enter a character, ﬁnd the key and number pulses to rotate the Jog Dial. Press the

corresponding key ﬁrst, then rotate the Jog Dial the required number of times. Or, if you keep

rotating the Jog Dial after pressing any dialling key, all of the characters in the table will be

displayed.

2-86

Operations

RECALL:

registers the recall signal

PAUSE or

: pause

CONFERENCE : - (hyphen) after the outside line (CO) access code

INTERCOM

: [ or ] (secret code) – Press the INTERCOM button before and after

the part you wish to conceal when it is shown on the display when

dialling.

, #, PAUSE, RECALL, CONFERENCE and

Table of Contents