Panasonic KX-TD208CE Operating Instructions Manual page 34

2.3 Making Calls
Dialling the Stored Number with a SAVE Button (Notebook Function)
During a conversation with an outside party or in on-hook status, you can store an outside
phone number without entering the ISDN port access number (9, 81 or 82) in memory.
The stored number is dialled automatically through a CO line as follows:
If you store the phone number during a conversation – the same outside line (CO)
If you store the phone number while in on-hook status – the idle outside line (CO)
It is required to assign the SAVE button on your telephone beforehand.
S
toring the number
PT
During a conversation or in on-hook status;
AUTO DIAL
STORE
Press STORE twice.
! • You can select the desired outside line when dialling by pressing the desired CO button or
!
dialling the ISDN port access number before pressing the SAVE button.
• If you dial in the handsfree mode (press SP-PHONE + SAVE button), redial will be
repeated four times at 120 second intervals by default (Automatic Redial – DPT only).
Repeating time and interval can be changed by System Programming.
• If there is a PAUSE in the assigned numbers, the numbers after the PAUSE are sent as
DTMF signals.
• Initial Settings (Section 2.2)
Customising the Buttons on Your Telephone
• Timer Programming (Section 3.5)
[208] Automatic Redial Repeat Time
[209] Automatic Redial Interval Time
2-20
Operations
AUTO DIAL
phone no.
STORE
Dial phone number
(24 digits max.).
D
Press SAVE.
ialling
PT
Off-hook Press SAVE.