DOS
If you installed the software from the Software Installation CD, the
online User's Guide is on your hard drive in the same directory as the
software. If you installed the software from a diskette, the online User's
Guide is on that diskette. To access the User's Guide, open the file
DOSGUIDE.TXT with any ASCII text editor.
Running the Install Assistant Program
The Install Assistant program evaluates
your computer system and recommends
the most successful way to attach your
new HP Colorado tape drive.
1. Insert the diskette labeled Run this first!
into your floppy drive.
2. For DOS and Windows 3.1:
Exit to the DOS prompt, type A:\ASSIST
(where A: is the floppy drive letter)
and press ENTER.
For Windows 95 and NT 4.0:
Click the Start button on the task bar,
select Run, type A:\ASSIST
(where A: is the floppy drive letter)
and click on OK.
3. Run the Install Assistant program and select "Recommend..."
4. Print the Install Assistant's results to provide answers to all the questions
you will encounter during this installation process:
ADDITIONAL
IDE CARD
REQUIRED?
Getting Started
JUMPER
SETTING?
WHICH
IDE
CONTROLLER?
3
DATA CABLE
INSTRUCTIONS?