HP Colorado 5GB C4354A Installation Manual page 8

8
11. Insert the drive into the drive bay. Be careful not to dislodge any cables
12. If there is not much room around the back of the tape drive, it may be
Installation Guide
inside your computer as you do this.
WARNING: The drive requires a secure fit. If there is a gap of 1/8 inch (3.2
mm) or more on either side of the drive, you will not be able to secure it. In this
case, obtain and attach "rails" from your computer manufacturer BEFORE
inserting the tape drive. (You may already have what you need from step 8.)
better to wait until step 17 to complete this step.
Secure the drive into the bay, using the screws included:
if installing in the large drive bay, use the silver screws
(#6-32 x 1/4" screws).
if installing in the small drive bay, use the black screws
(M3x0.5 x 6 mm metric screws).
The screws electrically ground the tape drive.
1
2
Use all four screws
3
4