6
8. Do you want to install the tape drive in a larger "half-height" drive bay or
9. If you are installing the tape drive in a larger "half-height" drive bay, skip
Installation Guide
a smaller "1-inch" drive bay?
Remove the cover plate from the desired drive bay.
Available half-height drive bay
(approx. 6" x 1.75"/15cm x 4.5 cm)
Available 1-inch drive bay
(approx. 3.5" x 1"/8.9 cm x 2.54 cm)
TIP: Keep any mounting hardware such as rails. You will need this
hardware for securing the drive in step 11.
this step.
If you are installing the tape
drive in the smaller "1-inch"
drive bay, remove and discard
the mounting bracket from
the tape drive.
The smaller drive bay
configuration (without
mounting brackets) is
illustrated in the remaining
steps of this guide.
See your computer's
manual if you need help
removing the drive bay cover.
Mounting
Bracket
Tape drive