Installing Colorado Backup For Windows (3.1 Or 3.11) - HP Colorado 5GB C4354A Installation Manual

Installing Colorado Backup for Windows (3.1 or 3.11)

NOTE: Do not install Colorado Backup for Windows for use in Windows 95.
This application does not support Windows 95 conventions such as long
filenames and backups of the registry. See "Installing Colorado Backup for
Windows 95" on page 30.
1. Attach the tape drive as described in Chapter 1, "Installing the
Hardware" on page 4. The drive must be attached to install and configure
the software.
2. Refer to the printout from the Install Assistant program that you made
AFTER installing the tape drive. It will tell you how to configure the tape
drive in the following steps.
3. Insert the software installation CD into your CD-ROM drive. If your
computer does not have a CD-ROM, see page 42.
4. In Windows, open the Program Manager window, if it is not already
open.
5. From the Windows' Program Manager, Click on the File menu and select
Run. The Run box appears.
6. In the Command Line box, type
your CD-ROM's drive letter).
The following screen appears:
7. Select the desired language or leave the default and click Next.
Installing the Software
D:\SETUP
and press (where D: is
ENTER
23