Storing Positions Into Memory; Recalling Positions From Memory - Mercedes-Benz 2008 R 320 CDI 4MATIC Operator's Manual

Controls in detail
Memory function*

Storing positions into memory

Adjust the seat ( page 44).
On the driver's side, additionally adjust
the steering wheel ( page 46) and
exterior rear view mirrors ( page 48)
to the desired positions.
Press memory button M.
Release memory button M and press
stored position button1, 2 or 3 within
3 seconds.
When the settings are stored to the
selected position, an acknowledge-
ment signal sounds.
142

Recalling positions from memory

!
Do not operate the power seats using mem-
ory button M if the seat backrest is in an exces-
sively reclined position. Doing so could cause
damage to front or rear seats.
Move seat backrest to an upright position first.
Press and hold stored position
button 1, 2 or 3 until the seat, steering
wheel and exterior rear view mirrors
have fully moved to the stored posi-
tions.
i
Releasing the stored position button stops
movement to the stored positions immediately.