Disconnecting, Removing, Reinstalling And Reconnecting The Battery - Mercedes-Benz 2008 R 320 CDI 4MATIC Operator's Manual

2008 r-class
Hide thumbs Also See for 2008 R 320 CDI 4MATIC:
Table of Contents

Advertisement

!
Never loosen or detach battery terminal
clamps while the engine is running or the
SmartKey is in the starter switch. Otherwise the
alternator and other electronic components
could be severely damaged.
Have the battery checked regularly by an autho-
rized Mercedes-Benz Light Truck Center.
Contact your authorized Mercedes-Benz Light
Truck Center for further information.
Warning!
Do not place metal objects on the battery as
this could result in a short circuit.
Use leak-proof battery only to avoid the risk
of acid burns in the event of an accident.
Disconnecting, removing, reinstalling
and reconnecting the battery
Warning!
Disconnecting, removing, reinstalling and
reconnecting the battery is a complicated
and technically demanding procedure that
also requires safety precautions to avoid the
G
risk of injury. We strongly recommend that it
be performed by a qualified technician or an
authorized Mercedes-Benz Light Truck
Center only. Please read the instructions
fully before beginning operation and only
undertake it if you feel fully capable of
performing all of the tasks involved as
described in these instructions. Observe all
safety instructions and precautions when
handling automotive batteries
( page 503). Performing the tasks involved
incorrectly can cause damage to the vehicle
and impair the operating safety of the
vehicle, and/or cause severe injury to you
or others.
i
With a disconnected battery you will no
longer be able to turn the SmartKey in the
starter switch and pressing the KEYLESS-GO*
start/stop button will have no effect.
G
Step 1 (Disconnecting)
i
If your battery is discharged, the vehicle
must be jump started ( page 511) using the
jump start contacts in the engine compartment,
or an accessory battery charge unit* approved
by Mercedes-Benz must be connected using the
jump start contacts in the engine compartment
(see separate instructions for the accessory
battery charge unit*) before any of the following
steps can be performed. If the battery cannot be
jumped or charged, please contact an autho-
rized Mercedes-Benz Light Truck Center.
Set the automatic transmission to
position P ( page 192).
Firmly depress the parking brake
( page 65).
Turn off the engine ( page 66).
Leave the ignition switched on
( page 39).
Practical hints
Battery
505

Advertisement

Table of Contents
loading

Table of Contents