Flat Tire; Preparing The Vehicle - Mercedes-Benz 2008 R 320 CDI 4MATIC Operator's Manual

2008 r-class
Hide thumbs Also See for 2008 R 320 CDI 4MATIC:
Table of Contents

Advertisement

Practical hints

Flat tire

Warning!
The dimensions of the spare wheel are
different from those of the road wheels. As
a result, the vehicle handling characteristics
change when driving with a spare wheel
mounted. Adapt your driving style accord-
ingly.
The spare wheel is for temporary use only.
When driving with spare wheel mounted,
ensure proper tire inflation pressure and do
not exceed a vehicle speed of
50 mph (80 km/h).
Drive to the nearest Mercedes-Benz Light
Truck Center as soon as possible to have the
spare wheel replaced with a regular road
wheel.
Never operate the vehicle with more than
one spare wheel mounted.
®
Do not switch off the ESP
with a spare
wheel mounted.
492

Preparing the vehicle

G
Vehicles with AIRMATIC*:
Make sure the vehicle level is set to
highway level ( page 276).
Park the vehicle in a safe distance from
moving traffic on a hard, flat surface
when possible.
Turn on the hazard warning flasher
( page 150).
Turn the steering wheel so that the
front wheels are in a straight-ahead
position.
Set the parking brake ( page 65).
Set the automatic transmission to
position P ( page 190).
Turn off the engine ( page 66).
Have any passenger exit the vehicle at
a safe distance from the roadway.
i
Open doors only when conditions are safe to
do so.
Remove the SmartKey from the starter
switch.
Vehicles with KEYLESS-GO*:
Turn off the engine by pressing the
KEYLESS-GO* button once
( page 66).
Open the driver's door (this puts
the starter switch in position 0,
same as with the SmartKey re-
moved from the starter switch). The
driver's door then can be closed
again.
Remove the KEYLESS-GO*
start/stop button from the starter
switch.

Advertisement

Table of Contents
loading

Table of Contents