Table of Contents
Advertisement
Controls in detail
Loading
With the cargo compartment expanded
in part ( page 292), use holders
behind C-pillars 2 and the cargo
tie-down rings in the third-row footwell
( page 291).
With the cargo compartment fully
expanded ( page 293), use holders
behind B-pillars 1 and the cargo
tie-down rings in the second-row
footwell ( page 291).
Open the hook and loop fasteners on
the cargo net package.
Roll out the cargo net.
Unfold the cargo net.
The cargo net bars must audibly
engage.
302
Installing the cargo net
Cargo net installed behind the B-pillar
1 Holder
2 Cargo net bar
Hang cargo net bar 2 on holder 1 as
indicated by the arrow.
Push cargo net bar 2 forward into
holder 1 in direction of arrow.
Pulling the cargo net tight
Belt hook attached in the second-row
footwell
1 Belt hook
2 Cargo tie-down ring
3 Tightening belt
Hook belt hook 1 into cargo tie-down
ring 2 in direction of arrow.
Pull tightening belt 3 by the loose end
in direction of arrow until the cargo net
is pulled tight.
After driving a short distance, make
sure the cargo net is still tight and, if
necessary, pull it tight again.
Advertisement
Table of Contents
