Mercedes-Benz 2008 R 320 CDI 4MATIC Operator's Manual page 247

Controls in detail
Power windows
Vehicles with KEYLESS-GO*:
Release the lock button ( page 68) on
the driver's outside door handle to stop
the closing procedure.
Immediately pull on the same outside
door handle and hold firmly. The
windows and the tilt/sliding sunroof*
(or tilt/sliding panel*) will open for as
long as the door handle is held but the
door is not opened.
Vehicles without tilt/sliding panel
Aim transmitter eye of the SmartKey or
SmartKey with KEYLESS-GO* at the
driver's outside door handle
( page 244).
The SmartKey or SmartKey with
KEYLESS-GO* must be in close
proximity to the driver's door handle.
246
Press and hold button ‹ on the
SmartKey or SmartKey with
KEYLESS-GO* until the windows and
the tilt/sliding sunroof* are completely
closed.
Release button ‹ on the SmartKey
or SmartKey with KEYLESS-GO* to
interrupt the closing procedure.
Vehicles with KEYLESS-GO*:
Press and hold the lock button on an
outside door handle ( page 68) until
the windows and the tilt/sliding
sunroof* are completely closed.
Release the lock button on the outside
door handle to interrupt the closing
procedure.
Vehicles with tilt/sliding panel*
If tilt/sliding panel is closed:
Aim transmitter eye of the SmartKey or
SmartKey with KEYLESS-GO* at the
driver's outside door handle
( page 244).
The SmartKey or SmartKey with
KEYLESS-GO* must be in close
proximity to the driver's door handle.
Press and hold button ‹ on the
SmartKey or SmartKey with
KEYLESS-GO* until the windows and
the roller sunblinds are completely
closed.
Release button ‹ on the SmartKey
or SmartKey with KEYLESS-GO* to
interrupt the closing procedure.