Table of Contents
Advertisement
Zone map South America
Press button æ or ç to move
the selection marker to the
submenu.
Press button j or k repeatedly
until the message
Zone
appears in the multifunction
display.
The selection marker is on the current
setting.
Press button æ or ç to set the
respective compass zone.
For information on how to call up the
compass, see "Compass" ( page 334).
Vehicle
Compass calibration
Compass Setting
i
Make sure you are in an area where you can
drive a full circle with your vehicle without dis-
turbing traffic in order to calibrate your compass.
This function is not available if your vehicle
is equipped with the COMAND system and
navigation module*.
In order to calibrate the compass properly,
mind the following:
Calibrate the compass in open terrain.
Nearby buildings, bridges, power lines
and large antenna masts, for example,
could impair compass calibration.
Switch off electrical consumers (e.g.
climate control, windshield wipers, or
rear window defroster).
Close all doors and the tailgate.
Start the engine ( page 53).
Press button æ or ç to move
the selection marker to the
submenu.
Controls in detail
Control system
Vehicle
181
Advertisement
Table of Contents
