Storing Positions Into Memory; Recalling Positions From Memory - Mercedes-Benz ML320 Cdi Operator's Manual

The memory button and stored position
buttons are located on the entry side of
each front seat base.
M Memory button
1, 2, 3 Stored position buttons
Switch on the ignition ( page 40).
or
Open the respective door.

Storing positions into memory

Adjust the seats ( page 43).
On the driver's side, additionally adjust
the steering wheel ( page 48) and ex-
terior rear view mirrors ( page 49) to
the desired positions.
Press memory button M.
Release memory button M and press
stored position 1, 2 or 3 within
3 seconds.
All settings are stored to the selected
position.
Controls in detail
Memory function*

Recalling positions from memory

!
Do not operate the power seats using
memory button M if the seat backrest is in an
excessively reclined position. Doing so could
cause damage to front or rear seats.
Move seat backrest to an upright position first.
Press and hold stored position
button 1, 2 or 3 until the seat, steering
wheel and exterior rear view mirrors
have fully moved to the stored posi-
tions.
i
Releasing the stored position button stops
movement to the stored positions immediately.
135