Table of Contents
Advertisement
Safety and Security
Occupant safety
4 Anchors, third-row seats
Install a LATCH type child seat accord-
ing to the manufacturer's instructions.
i
Non-LATCH type child seats may also be
used and can be installed using the vehicle's
seat belt system. Install child seat according to
the manufacturer's instructions.
92
Installation of infant and child restraint
system
This vehicle is equipped with tether
anchorages for a top tether strap at each
of the rear seat backrests. The tether
anchorage ring of the second-row middle
seat* is located on the rear of the seat
base ( page 94).
Outboard second-row and third-row
seats
1 Anchorage ring covers
Remove anchorage ring cover 1 from
seat backrest of the seat on which a
child seat is to be installed.
2 Anchorage rings
3 Hook
Move the respective head restraint to
its uppermost position ( page 135).
Release the respective seat backrest
( page 129).
The seat backrest folds down.
Advertisement
Table of Contents
