Mercedes-Benz 2008 R 320 CDI 4MATIC Operator's Manual page 318

Installing
Warning!
The rear center console must be properly in-
stalled on the center console base. Driving
with the rear center console not properly in-
stalled on the rear center console base may
cause the rear center console to come loose
and be thrown around in the vehicle interior,
causing injury to vehicle occupants during
braking
vehicle maneuvers
an accident
You can install the rear center console in
two different positions. In the most for-
ward position (position 1) you can expand
the cargo compartment fully ( page 293)
without removing the rear center console.
i
The storage compartment and the cup-
holders in the rear center console are only illumi-
nated, when the rear center console is installed
in the most rearward position (position 0).
G
1 Latch (position 1)
2 Latch (position 0)
3 Rear center console base
4 Anchorage point (position 1)
5 Anchorage point (position 0)
Controls in detail
Useful features
3 Rear center console base
6 Rear center console
Position center console 6 above
base 3.
Insert the tabs at rear of center
console 6 into anchorage points 4
or 5 on base 3.
Guide front of center console 6 down
towards base 3.
Center console 6 must rest on
base 3.
Press down on front of center
console 6 until it audibly engages in
latch 1 or 2.
317