Lighting submenu
Access the
Lighting
submenu via the
Settings
menu. Use the
Lighting
submenu to change the lamp and lighting
settings on your vehicle.
The following functions are available:
Function
Setting daytime running lamp
mode (USA only)
Setting locator lighting
Setting night security
illumination
Setting interior lighting delayed
shut-off
Setting daytime running lamp mode
(USA only)
i
This function is not available in countries
where the daytime running lamp mode is manda-
tory and therefore in a constant mode.
Move the selection marker with
button æ or ç to the
Page
submenu.
177
Press button j or k repeatedly
until the message
178
appears in the multifunction
Headlamp
display.
179
The selection marker is on the current
setting.
180
Press button æ or ç to select
Lighting
manual operation (
running lamp mode (
With daytime running lamp mode activated
Lamp Circuit
and the exterior lamp switch in
position M or U, the low beam
headlamps are switched on when the
engine is running.
Controls in detail
Control system
Manual
) or daytime
Constant
).
177