Table of Contents
Advertisement
Operation
Tires and wheels
Warning!
It is the driver's responsibility to calibrate
the TPMS on the recommended cold infla-
tion pressure. Underinflated tires affect the
ability to steer or brake the vehicle. You
might lose control over the vehicle.
If you want to set new reference values
manually:
Using the Tire and Loading Information
placard on the driver's door B-pillar
( page 366) or, if available, the sup-
plemental tire inflation pressure
information on the inside of the fuel
filler flap ( page 352), make sure the
tire inflation pressure of all four tires is
correct.
382
i
Restart the TPMS after adjusting the tire in-
G
flation pressure to the inflation pressure recom-
mended for the vehicle operating condition. Tire
pressure should only be adjusted on cold tires.
Observe the recommended tire inflation pres-
sure on the Tire and Loading Information placard
on the driver's door B-pillar ( page 366).
Some vehicles may have supplemental tire infla-
tion pressure information for driving at high
speeds ( page 372) or for vehicle loads less
than the maximum loaded vehicle condition
( page 372). If such information is provided, it
can be found on the inside of the fuel filler flap.
Press button è or ÿ on the mul-
tifunction steering wheel repeatedly
until the standard display menu
appears in the multifunction display
( page 164).
Press button j or k repeatedly
the current inflation pressures for each
tire appear in the display or the follow-
ing message appears in the display:
Tire pressure
displayed after
driving for
a few minutes
.
Press the reset button ( page 154).
The following message will appear in
the multifunction display:
Restart tire
pressure monitor?
Advertisement
Table of Contents
