Table of Contents
Advertisement
Practical hints
Replacing bulbs
4 Screws
Remove screws 4 that retain front fog
lamp 1.
Remove front fog lamp 1.
486
5 Front fog lamp bulb socket
i
An additional adapter cable is used to con-
nect the bulb socket with the vehicle's electrical
circuit. Reuse the adapter cable after replacing
the bulb.
Turn bulb socket 5 counterclockwise.
Pull bulb socket 5 out of the housing.
Pull the bulb out of bulb socket 5.
Insert the new front fog lamp bulb into
bulb socket 5.
Insert bulb socket 5 into the housing.
Turn bulb socket 5 clockwise until it
engages.
Insert front fog lamp 1 back into
bumper.
Fasten retaining screws 4.
Reinsert cover 2 and press it in until it
engages.
Fasten retaining screws 3.
Advertisement
Table of Contents
