Canon Pixma MP530 User Manual page 96

Enables/disables the summer time setting. If you select <ON>, you can select additional
sub-settings (This setting is not available in some countries and regions).
START DATE/TIME:
END DATE/TIME:
Sets the date and time that summer time starts.
SET MONTH Specify the month.
SET WEEK Specify the week.
SET DAY OF WEEK Specify the day of the week.
SET SHIFT TIME Specify the 24 hours.
Sets the date and time that summer time ends.
SET MONTH Specify the month.
SET WEEK Specify the week.
SET DAY OF WEEK Specify the day of the week.
SET SHIFT TIME Specify the 24 hours.
• UNIT TEL NUMBER
Enters the fax/telephone number printed on faxes you send.
• UNIT NAME
Enters the name printed on faxes you send.
• TX TERMINAL 10
Prints sender information at the top of each fax you send (The ON/OFF setting may be
available depending on the county of purchase).
TTl POSITION:
FAX/TEL NO. MARK:
Selects the position of the sender information (outside or inside
the image area) when sending black & white faxes
(Automatically set inside the image area for color faxes).
Selects the mark to appear before the fax/telephone number
printed on faxes you send.
When the machine is set to ring, selects the ring volume.
Selects the line monitor volume while dialing.
• OFFHOOK ALARM
Enables/disables the alarm that alerts you if the handset of the telephone connected to the
machine is not hung up properly.
• VOLUME CONTROL
Sets the RX RING VOLUME and LINE MONITOR VOL.
RX RING VOLUME:
LINE MONITOR VOL.:
• RX RING LEVEL
Selects the ring type for incoming call.
• TEL LINE TYPE
Selects the telephone line type setting for your machine.
W
Note
In New Zealand, select <TOUCH TONE>. You cannot use <ROTARY PULSE>.
• ACTIVITY REPORT
Sets whether to print the ACTIVITY REPORT automatically after every 20 transactions.
• TX SETTINGS
• ECM TX
94 Changing the Machine Settings Chapter 7