Canon Pixma MP530 User Manual page 81

Step1
Load paper in the Auto Sheet Feeder (See "Loading Print
27).
Load paper in the Cassette (See in
• The paper size should be A4, LTR or LGL
• Load legal-size paper in the Auto Sheet Feeder.
in the Auto
Ca:ssette" on
).
your machine, or you have a
MODE>
e
• If you wa
dedicated
W
Note
• You have to connect a telephone to the External Device Jack when you set <MANUAL
MODE>, <FAX/TEL AUTO SW>, <NETWORK SWITCH>, or <DRPD>.
• You have to connect an answering machine to the External Device Jack when you set
<ANS.MACHINE MODE>.
• Paper Size and Type
Load A4- or letter-size plain paper in the Auto Sheet Feeder or Cassette when you print the fax.
~ Important
• Load legal-size paper in the Auto Sheet Feeder.
• If the paper size is set to a setting other than <A4> or <8.5 x 11>, the received faxes will not
be printed, and the LCD will display <CHANGE PAPER TO> and <RECEIVED IN
MEMORY>. Change the paper size setting to <A4> or <8.5 x 11>, and then press [OK].
• If a size of paper other than A4, 8.5 x 11 or 8.5 x 14 is loaded in the paper source specified
under [Feed Switch], only one sheet of the loaded paper is printed and <CHECK PAGE
SIZE> is displayed. Replace the paper loaded in the specified paper source with A4, 8.5 x
11 or 8.5 x 14 then press [OK].
• The auto feed function can be applied when the paper size for both paper sources is set to
<A4> or <8.5 x 11>. See "About the Auto Sheet and on page 24.
W
Note
If the sender sent documents larger than letter-size (8.5" x 11"), such as 11" x 17" or legal-size
(8.5" x 14"), the sender's machine may send the fax, automatically shrinking or dividing it, or
send only a part of the original.
Chapter 4 Faxing 79