Canon Pixma MP530 User Manual page 45

• If you select <MANUAL ADJUST> in step 2, use
[-4]
to decrease the density, or use [J...] to
increase the density, then press [OK] .
• If you select <AUTO ADJUST (A» in step 2, the screen below appears on the LCD.
A4
PLAIN
STD
W
Note
When <AUTO ADJUST (A» is selected, the document loaded in the ADF cannot be scanned.
• Adjusting Image Quality
You can adjust the image quality according to the document to be copied.
1
Press [Image Quality].
IMAGE QUALITY
~
*STANDARD
~
2
Use [ . or . ] to select the image quality.
STANDARD:
HIGH:
FAST:
3
Press [OK].
Suitable for text-only documents.
Suitable for photographs.
Suitable for high speed copying at a lower image quality.
W
Note
• When using <FAST>, if the quality is not as good as expected, select <STANDARD> or
<HIGH> and try copying again .
• Select <HIGH> to copy in grayscale. Grayscale renders tones in a range of grays instead
of black or white.
• Copying onto Both Sides of the Paper (Two-sided copy)
You can copy two document pages onto the sides of a single sheet of paper.
(A)
(A) Long-side stapling
(B) Short-side stapling
(8)
Procedure:
1
Press [Two-Sided] to select <STAPLE SIDE>.
2
Use [.....] or . ] to select <LONG-SIDE STAPLE> or <SHORT-SIDE STAPLE>.
LONG-SIDE STAPLE: Staples on the long side of the paper.
SHORT-SIDE STAPLE: Staples on the short side of the paper.
Chapter 2 Copying
43