•
Using the ADF
W
Note
• Set a document on the Platen Glass if you want to scan it at optimum quality.
• The area (range) within 0.08" / 2 mm from the top edge of document cannot be printed
since the machine cannot scan it.
• Do not load the following types of documents in the ADF. They will jam.
- Wrinkled or creased paper
- Curled paper
- Torn paper
Paper with holes
- Carbon paper or carbon-backed paper
Surface treated paper
- Onion skin or thin paper
- Photograph or thick paper
1
Remove any documents from the Platen Glass.
2
Open the Document Tray.
3
Load the document in the ADF (1).
Load the document with the side you want to copy, fax, or scan face up in the ADF.
- - - - - - ( 2 )
- + - - - -
(A)
4
Adjust the Document Guides to match the document width (2).
Chapter 1
Before Printing
21