Canon Pixma MP530 User Manual page 18

• Operation Panel Name and Functions
(1) (2) (3) (5) (7) (8) (9)
(4) (6)
(10)
(11 ) (12)
MP530
(26) (25) (23) (21)
(24) (22) (20) (19) (18)
(16)
(17) (15) (14) (13)
(1) [ON/OFF]
Turns the machine ON and OFF. Before turning ON the machine, make sure the
Document Cover is closed.
W
Note
• The machine cannot receive faxes when the power is off.
• The power cannot be turned OFF while the machine is sending or receiving faxes, or
when there are unsent faxes stored in the machine's memory.
(2) [COPY]
Switches the machine to the Copy mode. Flashes when the machine is turned on.
(3) [FAX]
Switches the machine to the Fax mode.
(4) In Use/Memory Lamp
Flashes when the telephone line is in use. Lights when there are documents stored in the
machine's memory.
(5) [SCAN]
Switches the machine to the Scan mode. This button is used when the machine is
connected to a computer (Refer to the Scan Guide).
(6) Alarm Lamp
Lights or flashes orange, when an error occurs, or when paper or ink has run out.
(7) [Exposure]
Sets the copy intensity and fax intensity.
(8) [Enlarge/Reduce]
Sets the reduction or enlargement ratio for copying.
(9) LCD (Liquid Crystal Display)
Displays messages, menu selections, and the operation status.
(10) [Menu]
Displays menus to configure copy, fax, or machine settings.
(11) Numeric Buttons
Enters numerical values such as the number of copies, as well as fax/telephone numbers
and characters.
(12) [Redial/Pause]
Redials the last dialed number using numeric buttons. Also enters pauses between or
after numbers when dialing or registering numbers.
(13)[Coded Dial]
Press this button and a two-digit code to dial a pre-registered fax/telephone number.
16
Before Printing
Chapter 1