Canon Pixma MP530 User Manual page 84

call, the length of time the machine rings when it is a voice call, and the action the machine
must take if no one answers a voice call.
W
Note
For details on the FAXITEL AUTO SW settings, see "FAX/TEL AUTO SW" on 95.
• If You Have Subscribed to a Distinctive Ring Pattern Detection (DRPD)
Service with Your Telephone Company (US and Canada only):
• Select <DRPD>.
• When you receive a fax call: The machine will ring according to the ring pattern you
have chosen and receive the fax automatically.
• When you receive a voice call: The telephone will ring according to the ring pattern you
have chosen. Pick up the handset of your answering
machine to answer the call.
Setting the Ring Pattern
Your telephone company will assign a distinctive ring pattern to each number when you
order the DRPD service. Set the fax ring pattern that matches the pattern assigned by the
telephone company.
• If You Want Your Machine to Automatically Switch between Fax and
Voice Calls by the Call Ring Patterns (Network Switch) (This setting is
not available in some countries and regions.):
• Select <NETWORK SWITCH>.
The machine identifies whether a call is fax or not by ringing tone and receives it.
• When you receive a fax call: The machine will ring and receive the fax automatically.
• When you receive a voice call: The telephone will ring. Pick up the handset to answer
the call.
W
Note
• The name of this service varies depending upon a country. The typical example is as
follows:
Australia: NET SWITCH
New Zealand: FAX ABILITY
Finland: Own Ringing
• To use this feature, you need to subscribe to a compatible service provided by your
telephone company. Contact your telephone company for details.
• Setting the Receive Mode
1
Press [FAX], then press [Menu].
2
Press [OK].
RECEIVE MODE SET
~
*FAX ONLY MODE
~
3
Use [.....]
or.]
to select the receive mode.
82 Faxing
Chapter 4