Raymarine i40 Installation And Operation Instructions Manual page 21

Speed and depth transducer mounting
Ensure transducers are installed in accordance with
the instructions supplied with the transducer.
Wind vane transducer / rotavecta location
requirements
When selecting a location for your wind transducer it
is important to consider a number of factors.
The transducer's location must:
• Allow reasonable access for installation and
servicing.
• Be as high as possible and away from any
equipment which may shield the transducer or
otherwise disturb the air flow.
• Provide a horizontal mounting surface. If a surface
(e.g. mast top) is otherwise suitable but not
horizontal, make up a suitable wedged packing
piece to provide the necessary horizontal surface.
• There must also be a viable route for the
transducer cable to be routed to the product it is to
be connected to (i.e. display or converter).
Planning the installation
21