Noise Elimination (Blue Screen) - Memorex MVR2040-A Owner's Manual

NOISE ELIMINATION (BLUE SCREEN)

When you don't want to receive a weak signal broadcast, the Blue back screen can be obtained by selecting
the NO NOISE BACKGROUND "ON". When the unit is shipped from the factory, the NO NOISE BACK-
GROUND is set to the "ON".
CHECK BEFORE YOU BEGIN
• Turn ON the TV and set to the video channel 3 or 4.
• Turn ON the VCR POWER button.
• Press the TV/VCR selector button to select the
VCR mode.
When a TV is connected with an audio/video cable,
turn the TV and this VCR on and select the video
input mode on the TV.
3
1
2
Press the ENTER button to select the ON position.
ENTER
4C80401A-E(P20-29)
1
Press the MENU button, then press the SET + or
– button to select the NO NOISE BACKGROUND
option.
MENU
1
3
Press the MENU button again.
MENU
TIMER REC SET
CH SET UP
AUTO REPEAT ON OFF
SYSTEM SET UP
NO NOISE BACKGROUND
ON OFF
+ / – /ENTER/MENU
29
– +
SET
MENU
TIMER REC SET
CH SET UP
AUTO REPEAT ON OFF
SYSTEM SET UP
NO NOISE BACKGROUND
ON OFF
+ / – /ENTER/MENU
2
MENU
29
25/2/99, 21:27