Loading And Unloading Video Cassette Tapes - Memorex MVR2040-A Owner's Manual

LOADING AND UNLOADING VIDEO CASSETTE TAPES

Use only video cassette tapes marked
LOADING
Push the center of the tape until it is automatically retracted.
AUTOMATIC POWER ON
The VCR will turn on automatically and the POWER indicator will light.
AUTOMATIC PLAY
When loading a cassette tape without the erase prevention tab, playback will start immediately.
Insert the cassette with its labeled side facing
you. An inverted cassette cannot be inserted.
UNLOADING
To unload a cassette, press the EJECT button on the
1
remote control, or press the STOP/EJECT button on
the VCR twice. The first press will stop the tape in
any mode. The second press will eject the tape. The "
will appear on the screen. The EJECT indicator will light in
the display.
EJECT
STOP/EJECT
OR
AUTOMATIC EJECT
If the VCR automatically rewinds the tape to the beginning
(AUTO REWIND FEATURE), the tape will be ejected
automatically (See the NOTE on page 37).
•
NOTES: Always eject the tape when not in use.
•
The cassette can be ejected even if the POWER switch is "OFF".
30
4C80401A-E(P30-33)
.
The clock display will change in the counter display.
2
2
Pull the cassette out.
"
The counter display will change to the clock display.
30
1
25/2/99, 21:27