Memorex MVR2040-A Owner's Manual page 34

SPECIAL PLAYBACK
TO WATCH A TAPE REPEATEDLY
CHECK BEFORE YOU BEGIN
•
Turn ON the TV and set to the video channel 3 or 4.
•
Turn ON the VCR POWER button.
•
Press the TV/VCR selector button to select the VCR
mode.
When a TV is connected with an audio/video cable,
turn the TV and this VCR on, and select the video
input mode on the TV.
1 3
1
2
Press the ENTER button to select the ON
position.
ENTER
NOTE: To cancel repeat mode, follow the above steps 1 and 2, then press the ENTER button to select the OFF
position. Press the MENU button to return to the TV.
34
4C80401A-E(P30-33)
1
Press the MENU button.
Press the SET + or – button to select the AUTO
REPEAT option.
MENU
3
Press the MENU button.
If you press the PLAY button, the tape will play
over and over until the repeat mode is canceled.
MENU
TIMER REC SET
CH SET UP
AUTO REPEAT ON OFF
SYSTEM SET UP
NO NOISE BACKGROUND
" " will appear if you press the CALL button.
+ / – /ENTER/MENU To cancel, press the CALL button again.
34
(CONTINUED)
– +
SET
MENU
TIMER REC SET
CH SET UP
AUTO REPEAT ON OFF
SYSTEM SET UP
NO NOISE BACKGROUND
+ / – /ENTER/MENU
2
MENU
25/2/99, 21:28