Setting The Channels; Noise Elimination - Memorex MVR041 Owner's Manual

SETTING THE CHANNELS

This VCR is equipped with a channel memory feature
which allows channels to skip up or down to the next
channel set into memory, skipping over unwanted
channels. Before selecting channels, they must be
programmed into the VCR's memory. In addition to
normal VHF and UHF channels, this VCR can receive
up to 113 Cable TV channels. To use this VCR with an
antenna, set the TV/CATV menu option to the TV mode.
When shipped from the factory, this menu option is in
the CATV mode.
TV/CATV SELECTION
1
Press the MENU button.
2
Press the TRACKING/SET +
or – button to select the CH
SET UP option, then press the
ENTER button.
3
Press the TRACKING/SET +
or – button to select the TV/
CATV mode.
4
Press the ENTER button to
select the TV or CATV mode.
The arrow indicates the
selected mode.
TV - VHF/UHF channels
CATV - CABLE TV channels
5
Press the MENU button twice to return to normal TV
viewing.
AUTOMATIC MEMORY TUNING
The VCR can receive a maximum of 181 channels by
presetting the channels into memory.
CHECK BEFORE YOU BEGIN
• Turn ON the TV and set to the video channel 3 or 4.
• Turn ON the VCR POWER button.
• Press the TV/VCR selector button to select the VCR
mode.
When a TV is connected with an audio/video cable, turn
the TV and this VCR on, and select the video input mode
on the TV.
1
Press the MENU button.
Press the TRACKING/SET +
or – button to select the CH
SET UP option, then press
the ENTER button.
2
Press the TRACKING/SET +
or – button to select the
AUTO CH MEMORY mode,
then press the ENTER button.
3
The auto tuning will start. The
channel display will count up
and when finished, the screen
returns to normal. Channel
numbers will remain red until
auto memorizing is complete.
16
4E30401A E P14-19
TO ADD/DELETE CHANNELS
1
Press the MENU button.
Press the TRACKING/SET +
or – button to select the CH
SET UP option, then press the
ENTER button.
2
Press the TRACKING/SET + or
– button to select the ADD/DE-
LETE mode, then press the
ENTER button.
MENU
3
Select the desired channels to
CLOCK SET
TIMER REC SET
be added or deleted using the
AUTO REPEAT ON OFF
CH SET UP
TRACKING/SET + or – button.
LANGUAGE/IDIOMA/LANGUE
NO NOISE BACKGROUND
ON OFF
4
Press the ENTER button if you
+/–/ENTER/MENU
wish to DELETE the channel
CH SET UP
from memory.
TV CATV
Press the ENTER button if
AUTO CH MEMORY
you wish to ADD the
ADD/DELETE
unmemorized channel.
Repeat Steps 3 and 4 for each channel to be added
+ / – /ENTER/MENU
or deleted.
5
Press the MENU button three times after adding or
deleting all of the desired channels, to return to
normal TV viewing.

NOISE ELIMINATION

When you don't want to receive a weak signal
broadcast, the Blue back screen can be obtained by
selecting the NO NOISE BACKGROUND "ON". When
the unit is shipped from the factory, the NO NOISE
BACKGROUND is set to the "ON".
CHECK BEFORE YOU BEGIN
• Turn ON the TV and set to the video channel 3 or 4.
• Turn ON the VCR POWER button.
MENU
• Press the TV/VCR selector button to select the VCR
CLOCK SET
TIMER REC SET
mode.
AUTO REPEAT ON OFF
CH SET UP
LANGUAGE/IDIOMA/LANGUE
When a TV is connected with an audio/video cable,
NO NOISE BACKGROUND
ON OFF
turn the TV and this VCR on and select the video input
+/–/ENTER/MENU
mode on the TV.
CH SET UP
1
Press the MENU button, then
TV CATV
AUTO CH MEMORY
press the TRACKING/SET + or
ADD/DELETE
– button to select the NO
NOISE BACKGROUND option.
+ / – /ENTER/MENU
2
Press the ENTER button to
select the ON position.
CH 001
3
Press the MENU button again.
16
MENU
CLOCK SET
TIMER REC SET
AUTO REPEAT
CH SET UP
LANGUAGE/IDIOMA/LANGUE
NO NOISE BACKGROUND
+/–/ENTER/MENU
CH SET UP
TV CATV
AUTO CH MEMORY
ADD/DELETE
+ / – /ENTER/MENU
ADD
+ / – /ENTER/MENU
MENU
CLOCK SET
TIMER REC SET
AUTO REPEAT
CH SET UP
LANGUAGE/IDIOMA/LANGUE
NO NOISE BACKGROUND
+/–/ENTER/MENU
MENU
CLOCK SET
TIMER REC SET
AUTO REPEAT
CH SET UP
LANGUAGE/IDIOMA/LANGUE
NO NOISE BACKGROUND
+/–/ENTER/MENU
17/04/2001, 14:01
ON OFF
ON OFF
CH 002
ON OFF
ON OFF
ON OFF
ON OFF