Setting The Timer Recording - Memorex MVR2040-A Owner's Manual

SETTING THE TIMER RECORDING

Timer recording can be programmed on-screen with the remote control. The built-in timer allows automatic
unattended recording of up to 8 programs within 1 month.
EXAMPLE: Program a timer recording for the 26th day, channel 125 (CATV), 11:00 - 11:30 PM on timer program
number 1. (Tape speed: SLP)
CHECK BEFORE YOU BEGIN
•
Turn on the TV and set to the video channel 3 or 4.
• Press the TV/VCR selector button to select the VCR
mode.
•
Load a video cassette with the erase prevention tab
intact. The VCR will automatically turn on.
•
Check that the clock and date are correct (see page
25).
When a TV is connected with an audio/video cable,
turn the TV and this VCR on and select the video
input mode on the TV.
1
2 3
2
Press the SET + or – button to select the one of
the program line, then press the ENTER button.
– +
SET ENTER
NOTE:
To set the timer for other programs, press the MENU button. Check that the TIMER REC SET option is
selected, then press the ENTER button. Press the SET
press the ENTER button. Repeat steps 3 to 4 to set the second program.
38
4C80401A-E(P34-39)
1
Press the MENU button. Check the TIMER REC
SET option is selected, then press the ENTER
button.
MENU
Press the SET + or – button to select the date,
3
then press the ENTER button.
–
SET
DATE START END CH
– – – – – – – : – – – – : – – – – –
– – – – – – – : – – – – : – – – – –
– – – – – – – : – – – – : – – – – –
– – – – – – – : – – – – : – – – – –
– – – – – – – : – – – – : – – – – –
– – – – – – – : – – – – : – – – – –
– – – – – – – : – – – – : – – – – –
– – – – – – – : – – – – : – – – – –
+ / – /ENTER/CANCEL/MENU
+ –
or
38
ENTER
MENU
TIMER REC SET
CH SET UP
AUTO REPEAT ON OFF
SYSTEM SET UP
NO NOISE BACKGROUND
+ / – /ENTER/MENU
1 2 3
+ ENTER
TIMER REC SET
DATE 26 (WED)
START 12 : 00 AM
END – – : – –
CH 1
SPEED SP
+ / – /ENTER/CANCEL/MENU
button until the next program blinks, then
25/2/99, 21:42