Setting The Channels - Memorex MVR2040-A Owner's Manual

SETTING THE CHANNELS

This VCR is equipped with a channel memory feature which allows channels to skip up or down to the next
channel set into memory, skipping over unwanted channels. Before selecting channels, they must be programmed
into the VCR's memory. In addition to normal VHF and UHF channels, this VCR can receive up to 113 Cable TV
channels. To use this VCR with an antenna, set the TV/CATV menu option to the TV mode. When shipped from the
factory, this menu option is in the CATV mode.
TV/CATV SELECTION
1
Press the MENU button.
MENU
1 5
2 3
3
Press the SET + or – button
to select the TV/CATV mode.
– +
SET
CH SET UP
TV CATV
AUTO CH MEMORY
ADD/DELETE
+ / – /ENTER/MENU
26
4C80401A-E(P20-29)
2
Press the SET + or – button to select the CH SET
UP option, then press the ENTER button.
4
Press the ENTER button to
select the TV or CATV mode.
The arrow indicates the
selected mode.
ENTER
TV - VHF/UHF channels
CATV - Cable TV channels
26
– +
SET ENTER
MENU
TIMER REC SET
CH SET UP
AUTO REPEAT ON OFF
SYSTEM SET UP
NO NOISE BACKGROUND
ON OFF
+ / – /ENTER/MENU
2 4
5
Press the MENU button
twice to return to normal TV
viewing.
MENU
25/2/99, 21:26