Recording A Tv Program - Memorex MVR2040-A Owner's Manual

RECORDING A TV PROGRAM

RECORDING AND VIEWING THE SAME TV PROGRAM
CHECK BEFORE YOU BEGIN
•
Turn ON the TV and set to the video channel 3 or 4.
•
Turn ON the VCR POWER button.
•
Press the TV/VCR selector button to select the
VCR mode.
When a TV is connected with an audio/video cable,
turn the TV and this VCR on and select the video
input mode on the TV.
2
2
Press the SPEED selector button to select the
desired tape speed SP, LP or SLP.
SPEED
The counter and SP, LP or SLP will appear on the
screen about 4 seconds.
NOTE: Since the VCR has its own TV tuner, it is not actually necessary to have the TV turned on in order to make a
recording. Turning on the TV merely allows confirmation of the proper channel settings on your VCR.
4C80401A-E(P34-39)
1
Load a cassette tape with the erase prevention
tab intact.
The VCR will automatically turn on.
The clock display will change in the counter display.
3
3
Press the direct channel selection buttons or the
CHANNEL
be recorded.
1-9
10-19
20-99
100-125
1 1
00 : 00 : 00 SP
35
VHF/UHF/CATV CHANNELS
TV CATV
VHF VHF
2-13
2-13
UHF STD/HRC/IRC
14-69 14-36
(A) (W)
37-59
(AA) (WW)
60-85
(AAA) (ZZZ)
86-94
(86) (94)
95-99
(A-5) (A-1)
100-125
(100)(125)
01
(5A)
or button to select the channel to
Press 0 twice and then 1-9 as required.
(Example; to select 2, press 002.)
Press 0 first and then the remaining 2
digits in order from left to right.
(Example; press 018 for 18.)
Press 2 digits in order. (Example; press
22 for 22.)
Press the 3 digits in order. (Example;
press 110 for 110.)
CH 110
CHANNEL
0
or
25/2/99, 21:42
35