Setting The Channels; Noise Elimination - Memorex MVR4042 Owner's Manual

SETTING THE CHANNELS

This VCR is equipped with a channel memory feature
which allows channels to skip up or down to the next
channel set into memory, skipping over unwanted
channels. Before selecting channels, they must be
programmed into the VCR's memory. In addition to
normal VHF and UHF channels, this VCR can receive
up to 113 Cable TV channels. To use this VCR with an
antenna, set the TV/CATV menu option to the TV mode.
When shipped from the factory, this menu option is in
the CATV mode.
TV/CATV SELECTION
1
Press the MENU button.
2
Press the TRACKING SET + or –
button to select the CH SETUP
option, then press the ENTER
button.
3
Press the TRACKING SET + or
– button to select the TV/CATV
mode.
4
Press the ENTER button to select
the TV or CATV mode. The arrow
indicates the selected mode.
TV - VHF/UHF channels
CATV - CABLE TV channels
5
Press the MENU button twice to return to normal TV
viewing.
AUTOMATIC MEMORY TUNING
The VCR can receive a maximum of 181 channels by
presetting the channels into memory.
CHECK BEFORE YOU BEGIN
• Turn ON the TV and set to the video channel 3 or 4.
• Turn ON the VCR POWER button.
• Press the TV/VCR selector button to select the VCR
mode.
When a TV is connected with an audio/video cable, turn
the TV and this VCR on, and select the video input mode
on the TV.
1
Press the MENU button.
Press the TRACKING SET + or –
button to select the CH SETUP
option, then press the ENTER
button.
2
Press the TRACKING SET + or
– button to select the AUTO CH
MEMORY mode, then press the
ENTER button.
3
The auto tuning will start.
The channel display will count
up and when finished, the
screen returns to normal.
16
4F90701A/E P14-19
TO ADD/DELETE CHANNELS
1
Press the MENU button.
Press the TRACKING SET +
or – button to select the CH
SETUP option, then press the
ENTER button.
2
Press the TRACKING SET + or
– button to select the ADD/DE-
LETE mode, then press the
ENTER button.
3
Select the desired channels to
be added or deleted using the
TRACKING SET + or – button.
4
Press the ENTER button if you
á ñ
wish to DELETE the channel
from memory.
Press the ENTER button if
you wish to ADD the
unmemorized channel.
Repeat Steps 3 and 4 for each channel to be added
á ñ
or deleted.
5
Press the MENU button three times after adding or
deleting all of the desired channels, to return to
normal TV viewing.

NOISE ELIMINATION

When you don't want to receive a weak signal
broadcast, the Blue back screen can be obtained by
selecting the NO NOISE BACKGROUND "ON". When
the unit is shipped from the factory, the NO NOISE
BACKGROUND is set to the "ON" position.
CHECK BEFORE YOU BEGIN
• Turn ON the TV and set to the video channel 3 or 4.
• Turn ON the VCR POWER button.
• Press the TV/VCR selector button to select the VCR
mode.
When a TV is connected with an audio/video cable,
turn the TV and this VCR on and select the video input
á ñ
mode on the TV.
1
Press the MENU button, then
press the TRACKING SET + or
– button to select the SYSTEM
SETUP option. Then press
á ñ ENTER.
2
Press the TRACKING SET + or
– button to select the NO
NOISE BACKGROUND option.
3
Press the ENTER button to
select the ON position.
4
Press the MENU button twice
to return to normal TV viewing.
16
á ñ
á ñ
á
á ñ
á ñ
20/03/2003, 10:32
ñ