Memorex MVR2040-A Owner's Manual page 39

4
Set the start time, end time, channel and tape
speed as in step 3.
– +
SET ENTER
5
6
Press the TIMER REC button. The power will go
off, the Timer Record indicator will light and the
VCR stands by for recording.
TIMER REC
To cancel timer recoreding, press the button again and
the Timer Record indicator will go out.
•
NOTES: The VCR cannot be used while the Timer Record indicator is lit.
•
After a power failure or disconnection of the power plug, all programmed recording settings must be reset
upon resumption of power. In this case, reset the clock (see page 25) and reprogram any timer recordings.
•
Press the CANCEL button to move cursor backward for correction.
•
To record from external source set the channel to "L1" or "L2". "L1" and "L2" will appear next to
CH 125 (or 69).
4C80401A-E(P34-39)
5
Press the ENTER button to accept them.
To enter other programmes, repeat step 2
through 4. Or, press the MENU button twice to
return to the normal screen.
ENTER
TIMER REC SET
DATE 26 (WED)
START 11 : 00 PM
END 11 : 30 PM
CH 25
SPEED SLP
+ / – /ENTER/CANCEL/MENU
4
TO CORRECT THE SETTINGS
While setting, press the ENTER button to flash the item
to correct, then re-enter the setting with the SET
button.
When finished, press the ENTER button.
39
MENU
DATE START END CH
26 (WE) 11:00PM 11:30PM 25 SLP
– – – – – – – : – – – – : – – – – –
– – – – – – – : – – – – : – – – – –
– – – – – – – : – – – – : – – – – –
– – – – – – – : – – – – : – – – – –
– – – – – – – : – – – – : – – – – –
– – – – – – – : – – – – : – – – – –
– – – – – – – : – – – – : – – – – –
+ / – /ENTER/CANCEL/MENU
5
6
+
or
25/2/99, 21:43
–
39