Setting The Video Channel - Memorex MVR2040-A Owner's Manual

SETTING THE VIDEO CHANNEL

To view playback of a recorded tape, or to watch a program selected by the VCR's channel selector, the TV
must be set to channel 3 or 4 (video channel).
When a TV is connected with an antenna cable only.
1
Turn ON the VCR POWER
button.
POWER
4
Press the TV/VCR selector button to select the
VCR position.
TV/VCR
The VCR indicator will light in the display.
For a push-button TV tuner
If CH 3 or 4 corresponding to the video channel cannot be tuned on your TV, proceed as follows: set the VCR 3/4
channel selector and the TV to CH 3 or 4, play back a prerecorded tape and tune the TV to receive a sharp color
picture from the video cassette recorder. Refer to your TV owner's manual for details.
4C80401A-E(P20-29)
2
Set the 3/4 Channel selector
switch (Rear of the VCR) to
CH 3 or 4.
CH
3 4
1
5
Select any channel to receive a TV station in
your area.
CHANNEL
The channel number will appear on the screen and
display about 4 seconds.
23
3
Turn ON the TV and set to
CH 3 or 4 to correspond
with the channel selected
in 2 .
3 4
OR
5
4
CH 125
23
25/2/99, 21:26