Fitting The Wall Plate; Mounting The Thermostat Onto The Wall Plate - Secure SRT323 User And Installation Instructions Manual

Fitting the Wall Plate

Offer the plate to the wall in the position where the SRT323
is to be mounted and mark the fixing positions through the
slots in the wall plate. Drill and plug the wall, then secure
the plate into position. The slots in the wall plate will
compensate for any misalignment of the fixings. Connect
the wires in accordance with the wiring diagrams and fit the
terminal covers

Mounting the Thermostat Onto the Wall Plate

Complete the installation by swinging the
room thermostat into position by
engaging with the lugs at the top of the
wall plate before pushing it carefully into
its plug-in terminal block.
Tighten the 2 captive screws on the
underside of the unit.
Now ensure that the system is responding to the ON/OFF
commands from the Room Thermostat and explain its
operation to the householder before handing over these
Instructions.
13