Connecting A Device That Supports Scene Link Playback (Remote Connection); Connecting A Device Compatible With The Trigger Function - Yamaha RX-A3020 Owner's Manual

1 2 3 4 5 6
Other connections
Connecting a device that supports
SCENE link playback (remote connection)
If you have a Yamaha product that supports SCENE control signal transmission, you
can operate it remotely by connecting it to one of the REMOTE OUT jacks, using a
monaural mini-jack cable, and linking with the SCENE function (p.61).
The unit (rear)
REMOTE OUT jack
HDMI RS-2
AV 3 AV 4 AV 5 AV 6 AV 7
REMOTE
1
TRIGGER
P IN OUT IN
C R OUT
1
MONITOR OUT/ZONE OUT REMOTE
1 2
Y P P
B R IN OUT IN OUT
2
D
12V 0.1A
ZONE OUT/PRE OUT PRE OUT (SINGLE) (FRONT)
R 1
2
ZONE 2 / ZONE 3 / (REAR)
ER FRONT SURROUND SUR. BACK CENTER
F.PRESENSE R.PRESENSE SUBWOOFER
SPEAKERS
ZONE 2/ZONE 3
K ZONE 2/ZONE 3/R.PRESENCE CENTER FRONT
BI–AMP
L R L R L
EXTRA SP2 R EXTR
NGLE
• If you connect a Yamaha product that supports the SCENE link playback function to one of the REMOTE
OUT jacks, you can remotely start playback on it by linking with a scene selection (p.61). To enable the
SCENE link playback function, specify the device type in "Device Control" (p.106) in the "Scene" menu.
• You can also connect an infrared signal receiver/emitter to operate the unit and external devices from
another room (p.94).
7 8 9
2
OUT
Remote input
REMOTE
IN
Yamaha product
(such as a DVD player)

Connecting a device compatible with the trigger function

The trigger function can control an external device in conjunction with operating the
unit (such as powering on/off and input selection). If you have a Yamaha subwoofer that
supports a system connection or a device with a trigger input jack, you can use the
trigger function by connecting the external device to one of the TRIGGER OUT jacks.
TRIGGER OUT
1–2 jacks
The unit (rear)
TRIGGER
OUT
RS-232C
AV 6 AV 7
1
TRIGGER
OUT
1
REMOTE
1 2
OUT IN OUT 2
2
12V 0.1A
12V 0.1A
LE) (FRONT)
1
2
(REAR)
CK CENTER
SUBWOOFER
ZONE 2/ZONE 3/F.PRESENCE/ AC IN
CENTER FRONT
R L BI–AMP
EXTRA SP1
R L
• You can configure the trigger function settings in "Trigger Output1" and "Trigger Output2" (p.128) in the
"Setup" menu.
PREPARATIONS ➤ Connecting other devices
System connection
input
Yamaha subwoofer that
supports a system connection
47
En