Connecting A Device That Supports Scene Link Playback (Remote Connection) - Yamaha RX-V673 Owner's Manual

Connecting a device that supports
SCENE link playback (remote connection)
If you have a Yamaha product that supports SCENE control signal transmission, you
can operate it remotely by connecting it to the REMOTE OUT jack, using a monaural
mini-jack cable, and linking with the SCENE function (p.46).
The unit
(rear) REMOTE OUT jack
Remote input
Yamaha product
(such as a DVD player)
Connecting a device compatible with the trigger function
The trigger function can control an external device in conjunction with operating the
unit (such as powering on/off and input selection). If you have a Yamaha subwoofer that
supports a system connection or a device with a trigger input jack, you can use the
trigger function by connecting the external device to the TRIGGER OUT jack.
The unit (rear)
TRIGGER OUT jack
Systemconnection
input
• If you connect a Yamaha product that supports the SCENE link playback function, to the REMOTE OUT
jack, you can remotely start playback on it by linking with a scene selection (p.46). To enable the SCENE
link playback function, specify the device type in "Device Control" (p.84) in the "Scene" menu.
• You can also connect an infrared signal receiver/emitter to operate devices in the main zone from Zone2
(p.74).
Yamaha subwoofer that
supports a system connection
• You can configure the trigger function settings in "Trigger Output" (p.101 ) in the "Setup" menu.
PREPARATIONS • Connecting other devices En 34