GEM GPS3600 Owner's Manual page 69

eter to either increase, decrease or completely
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
remove the effect.
Assignable values: -63 (minimum rate) ... 0 (un-
changed) ... +63 (maximum rate).
LFO DELAY: This parameter determines the de-
lay of the entry of the LFO. In acoustic instru-
ments, vibrato generally enters after the attack
phase, and mainly forms part of the sustain phase
of the sound.
Assignable values: -63 (minimum rate) ... 0 (un-
changed) ... +63 (maximum rate) ..
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
THE PRESET SOUND OPTIONS
○ ○
COPY TO... (F6)
Copies the modifications applied to the current
Preset track to a different track of the same Pre-
set. The parameter values are copied, NOT the
Sound, therefore, if a Piano sound is at the source
and a Bass is at the destination, the Bass sound
will inherit the parameter modifications and play
with the same characteristics as those applied to
the Piano sound.
RESTORE TRACK (F7)
Cancels the modifications of the selected track.
1. Press F7 to cancel. You are prompted to
2. Press ENTER again to confirm, or ESCAPE
RESTORE ALL TRACKS (F8)
Cancels the modifications applied to all the tracks
of the Preset.
1. Press F8 to cancel. You are prompted to
2. Press ENTER again to confirm, or ESCAPE
Track - Select the track with the DIAL.
In Style/RealTime mode, the maximum
number of tracks is 16, in Song mode, 32.
reconfirm the operation.
to cancel.
reconfirm the operation.
to cancel.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Sounds 2•7
○ ○