GEM GPS3600 Owner's Manual page 244

THE EDIT PAGE PARAMETERS
LFO WAVE
Selects the waveform of the low frequency oscil-
lation.
Assignable values: Off, Sinus, Triangle, Saw,
Square, Random, Sample/Hold .
LFO RATE
Determines the velocity of the LFO.
Assignable values: 1 ... 200 .
LFO DEPTH
Determines the depth of action of the LFO.
Assignable values: 0 ... 7 .
LFO DELAY
Determines the delay before the entry of the LFO.
Entry of the LFO is gradual.
Assignable values: 0 ... 64 .
PITCH FILTER
Checks the pitch of the voices. In Free mode, all
pitch imperfections detected due to minor
changes in the pitch of the voice rest unchanged.
In Auto Correction mode, the imperfections are
automatically corrected.
Assignable values: Free, Auto Correction .
CHORD TYPE
Selects from two different modes of harmoniza-
tion according to the chord played.
Assignable values: Close and Smart ..
[ See also Harmony Type in «Edit Tracks/Splits» ].
VOCODER TRACK
Selects the track exploited by the Vocoder.
Assignable values: 1 ... 32 .
TRANSPOSE
Transposes the Vocoder track one octave above
standard pitch.
Assignable values: Off, Octave+ .
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
7•6 Vocal Processor
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
VOICE SET (F4)
In this page, it is possible to recall up to 16 Cus-
tom configurations.
Each Custom recalls a different setting of all the
Vocoder parameters (Volume, Pan, Mute, Mode,
lfo,...). The Custom settings are not program-
mable.
You can use the Custom Voice Sets as a starting
point for your configurations and, any subsequent
changes to the settings can be memorized to the
Presets.
Vocal Processor - Voice Set
LOCK (F8)
The LOCK function locks the current Vocal set-
tings to protect them from subsequent Preset
changes.
To lock the current setting, press the function
button F8 to activate the Lock. The icon is shown
in negative highlight and the small lock closes.
Vocal Processor - Chord mode, Volume option, Lock on
○ ○