Mic/Line Input - GEM GPS3600 Owner's Manual

○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Display controls
Viewing controls for the display. The settings are
conserved to memory after power down. They
cannot be saved to disk.
CHORD LANGUAGE
Determines the viewing language (English/Ital-
ian/French/German) of the chord notation in the
Score.
HELP LANGUAGE
Selects the language for the Help file.
Your model may not contain a file in a different
language.
DISPLAY MODE
Offers the choice of viewing black text on a white
background (Positive) or white texts on a black
background (Negative).
LAST SELECTION MEMORY
If enabled (ON), the last selected carried out in
either Style, Preset or Sound mode is memorised.
If disabled (off), the selection window of these
modes to not show the last selection made.
Edit General - Display controls
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
This is where you can regulate your input signal
when using the Audio Vocal Processor. This page
contains bar graphs to monitor the level of sig-
nals fed into the Mic/Line inputs 1 and 2.
The input signal is directed to the internal sound
generator and effects processor before being di-
rected to the LEFT and RIGHT outputs and the
speaker system.
You can regulate the signal gain with the twin
GAIN knob located to the left of the Mic/Line jacks.
An optimum signal level can be obtained when
the input signal, at maximum volume, almost
touches the extreme right of the VU bar graph
(the clipping zone).
Regulate the maximum volume with the MIC/LINE
panel slider. The M. VOL slider regulates the sum
of the internal sound generator output level (PS/
GPS sounds and signal of the MIC/LINE IN in-
puts).
INPUT VU
Monitors the level of the input signal. Controls
the signal gain of the two signals fed into the Mic/
Line IN1 and IN2 jacks with the twin knob 1 and
2 located to the left of the inputs.
Edit General - Mic/Line In

Mic/Line Input

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Edit General 8•5
○ ○