GEM GPS3600 Owner's Manual page 204

Playback stops automatically when the last Song
or MIDI File reaches the end. During playback,
press PLAY ALL SONGS to enter the Play All
Songs display when you can select the available
options with the corresponding Soft buttons.
Press STOP at any time during playback to stop
the current song and return to the Song view
page. This will cancel the Play All Songs opera-
tion.
CREATE A LIST
If the Play All songs window is not showing, press
PLAY ALL SONGS twice then press RESET LIST
(F4). Reset List cancels all the Songs from the
current list and stops playback instantly.
The Play All Songs window shows the Songs or
MIDI files directory and the destination directory,
(List), on the right. If necessary select the source
device, Floppy disk, (F1), Hard disk, (F2) and se-
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
6•6 Reference Guide
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
lect the type of file to include in the list by press-
ing SONG, (F5) or SMF (F6).
After selecting a file to include in the list, press
ENTER. The selected file is added to the first
available space in the list and the destination
frame moves one step forward.
If the disk contains more than one Block, press
ESCAPE to exit from the current directory, select
another block and press ENTER to gain access.
Select other files and press ENTER each time to
include them in the list.
IMPORTANT: If you are working from Floppy
disk, do not extract the disk during the file inser-
tion procedure; doing so will provoke the cancel-
lation of the list.
Fill the list in a single step with the SELECT ALL
button, (F7).
Press PLAY, (F8) to start the playback of the
Songs in the list.
During playback, the Song View page is shown.
You can select a track and set it to key-play in
order to play along with the Song. Use the <<
and >> buttons to advance or rewind the Song at
will. Press STOP only if you want to stop play-
back, otherwise you will cancel the Play All Songs
operation.
THE PLAY ALL SONGS FUNCTIONS
FLOPPY DISK (F1)
Selects the floppy disk as the file source.
HARD DISK (F2)
Selects the Hard disk as the file source.
AUTO PRELOAD (F3)
When this option is selected (negative highlight),
Songs are loaded into memory together with all
associated RAM-Sounds and RAM Sounds. If
there is not sufficient memory in RAM to accept
the associated Sounds, ROM Sounds will be used
○ ○