GEM GPS3600 Owner's Manual page 209

9. Start to play after the countdown.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Events will be recorded in the track or tracks
active for recording.
10. When you have finished, stop the recording
with STOP.
Note: Pressing STOP twice rewinds the Song back
to the beginning.
11. To add additional events to the same
track(s), press STOP again to take the song
pointer to the starting point and repeat
points 8 - 10.
Note: To add notes to existing ones in a track, select
the Overdub option. To substitute existing notes in a
recorded track with new ones, select the Replace
option.
12. If you are satisfied with the recording, con-
firm the track or tracks by pressing the cor-
responding Soft buttons.
The recording will be confirmed and the tracks
set to «seq-play».
13. Repeat the recording procedures for other
tracks.
14. Press RECORD to escape Record mode.
The LED of the RECORD button will turn off
and the display returns to normal.
15. Press PLAY to listen to the playback.
Let's examine theTime/Tempo parameters.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
TIME/TEMPO PAGE
○ ○
MODE... (F1)
Opens the «Record Mode» dialog window where
you can select various recording options.
Replace - The new notes substitute "old" notes
already present in the tracks being recorded.
Overdubb - New notes are merged with those
already present in the tracks being recorded.
Punch In/Out - A means of inserting a correction
without repeating a recording. Punch recording
is activated by pressing an appropriately pro-
grammed pedal (in «Controls» of «Edit Preset»).
Activate the recording with PLAY. When the song
reaches a position just before the point at which
the correction must be inserted, press the pedal.
At this point, the recording proceeds in "replace"
mode. When the correction is complete, release
the pedal to stop the replace recording.
OPTION... (F2)
Metronome options.
Countdown - A lead into the recording during
which time no events can be captured.. Settings:
On, Off.
Metronome vol. - Volume setting of the metro-
nome tick. Settings Off, 10...127.
CONTROLS REC... (F3)
Recording options for Tempo, Master Volume,
effects changes. These events are captured in
the Master Track.
Tempo - To record the Tempo variations. Set-
tings: On, Off.
P.Volume. - To record the general Volume of the
instrument using the Damper pedal programmed
to operate as a continuous control (Volume).
These events are recorded as CC07 (see Ap-
pendix). Settings: On, Off.
Effect - To record the changes of the effects as-
signed to the Preset and respective effect volume
levels. These events are captured as CC16, CC17,
CC48, CC49 (see Appendix). Settings: On, Off.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Recording a Song 6•11
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○